News! 简体中文 繁體中文 English
Services
EMC > Automotive EMC

CCS established our Automotive Components Testing Service in 2007, and we have built up extensive experience and expertise in testing automotive components and systems as well as a wide range of electrical and electronic products.

We conduct professional testing services that meet American Military Standards and those of major vehicle manufacturers, providing system and component suppliers with rapid and convenient service. In addition, CCS also provides quick testing and certification services to customers that require E/e mark certification.

Product Category

  • Telematics Information Systems
  • On-Board Convenience Systems
  • Transmission Systems
  • Antenna Systems
Test Capabilities
  • Radiated Emission Testing: 20 Hz — 40 GHz
  • Conducted Emission Testing: 9 kHz — 108 MHz
  • Radiated Immunity Testing: 20 MHz — 18 GHz 100V/m(max)
  • Transverse Electromagnetic (TEM) Cell: 10 kHz —200 MHz 100V/m(max)
  • Bulk Current Injection (BCI): 100 kHz — 1 GHz 180 mA(max)
  • 150mm Stripline Testing: 1 MHz — 1 GHz 200 V/m(max)
  • Immunity to radiated magnetic fields: 10 Hz — 250 kHz 180 dBuA/m(max)
  • Conducted Immunity Testing: 10 Hz — 100 MHz 10V(max)
  • Transient Immunity Testing: International and Automotive standards requirement 
  • Transient Emission Testing: International and Automotive standards requirement
  • Electrostatic Discharge (ESD) Testing: Contact and Air 30 kV
Facilities
  • 2 x 3m Semi-Anechoic Chamber
  • 3 x Immunity Chamber
  • 1 x Fully Chamber
  • 1 x TEM cell
  • 1 x Stripline
  • 1 x Transient Pulse Generator Systems
  • 1 x RS Test System


Applied Standards




Country Standard Description
International Standard CISPR 25 (2002,2008) Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices
ISO 7637-1 (1990) Part 1:(1990) Passenger cars and light commercial vehicles with nominal 12 V supply voltage-Electrical transient conduction along supply lines only
ISO 7637-2 (1990) Part2:(1990) Commercial vehicles with nominal 24 V supply voltage- Electrical transient conduction along supply lines only
ISO 7637-2 (2004/2011) Part 2:(2004/2011) Electrical transient conduction along supply lines only (12V/24V)

 

ISO 7637-3 (1995) Vehicles with nominal 12 or 24V supply voltage- Electrical transient transmission by capacitive and inductive via lines other than supply lines
ISO 7637-3 (2007) Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12V or 24V supply voltage - Electrical transient transmission by capacitive and inductive coupling
via lines other than supply lines
ISO 11452-2 Road Vehicles- Component test methods for electrical disturbance from narrowband radiated electromagnetic energy- Part 2: Absorber-lined shielded enclosure
ISO 11452-3 Road Vehicles- Component test methods for electrical disturbance from narrowband radiated electromagnetic energy- Part 3: Transverse electromagnetic (TEM) cell
ISO 11452-4 Road Vehicles- Component test methods for electrical disturbance from narrowband radiated electromagnetic energy- Part 4: Bulk current injection (BCI)
ISO 11452-5 Road Vehicles- Component test methods for electrical disturbance from narrowband radiated electromagnetic energy- Part 5: Stripline
ISO 11452-7 Road Vehicles- Component test methods for electrical disturbance from narrowband radiated electromagnetic energy- Part 7: Direct radio frequency (RF) power injection
ISO 11452-8 Road Vehicles- Component test methods for electrical disturbance from narrowband radiated electromagnetic energy- Part 7: Direct radio frequency (RF) power injection
ISO 10605 Road vehicles- Test methods for electrical disturbances from electrostatic discharge
ISO 16750-2 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
Europe e-mark 2009/19/EC
(2004/104/EC)
Commission Directive 2009/19/EC of 12 March 2009 (Commission Directive 2004/104/EC of 14 October 2004)
e-mark 2009/108/EC
(97/24/EC)
Commission Directive 2009/1080/EC of 17 August 2009
correcting and amending Directive 2005/30/EC amending, for the purposes of their adaptation to
technical progress, Directives 97/24/EC and 2002/24/EC of the European Parliament and of the
Council, relating to the type-approval of two or three-wheel motor vehicles
(Corrigendum to Directive 97/24/EC of the European Parliament and of the Council of 17 June
1997 on certain components and characteristics of two or three-wheel motor vehicles (OJ L 226
of 18.8.1997))
e-mark ECE R10 Rev.03 Consideration of draft amendments to existing Regulations Proposal for the 03 series of
amendments to Regulation No. 10 (Electromagnetic compatibility)
R&TTE EN 301 489-1 Clause 9.6 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements
EU EN 50498 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles
BMW GS95002 Electromagnetic Compatibility (EMC) Requirements and tests
Peugeot, Citroen B21 7090 General technical specifications concerning the enviroment of electronic and electrical
equipment.
B21 7110 Technical specifications concerning the enviroment of electronic and electrical equipment
electrical characteristics.
MG, Rover MGR ES: 62.21.627 Automotive Electromagnetic Compatibility
Volkswagen TL-965 Interference Emission Requirements
TL-82066 Electromagnetic Compatibility of Automotive Electronic Components Conducted Interference
TL-82166 Electromagnetic Compatibility of Automotive Electronic Components Radiated Interference
TL-82366 Electromagnetic Compatibility of Automotive Electronic Components Coupled Interferences on
Sensor Cables
TL-82466 Electromagnetic Compatibility of Automotive Electronic Components Immunity to Electrostatic
Discharge (ESD)
USA SURFACE VEHICLE STANDARD SAE J1113-2 Electromagnetic compatibility measurement procedures and limits for vehicle component (Except
aircraft) - Conducted immunity, 30 Hz to 250 kHz- All leads
SAE J1113-3 Conducted immunity, 250 kHz to 500 MHz, direct injection of radio frequency (RF) power
SAE J1113-4 Immunity to radiated electromagnetic fields- Bulk Current Injection (BCI) method
SAE J1113-11 (R) Immunity to Conducted Transients on Power Leads
SAE J1113-12 (R) Electrical Interference by Conducted and Coupling – Coupling Clamp and Chattering Relay
SAE J11113-13 (R) Electromagnetic Compatibility Measurement Procedure for Vehicle Components- Part 13:
Immunity to Electrostatic Discharge
SAE J1113-21 Electromagnetic Compatibility Measurement Procedure for Vehicle Components- Part 21:
Immunity to Electromagnetic Fields, 10kHz to 18GHz, Absorber-Lined Chamber
SAE J1113-22 Electromagnetic Compatibility Measurement Procedure for Vehicle Components- Part
22:Immunity to radiated magnetic fields from power lines
SAE J11113-23 Electromagnetic Compatibility Measurement Procedure for Vehicle Components- Part 23:
Immunity to Radiated Electromagnetic Fields, 10kHz to 200MHz, Strip Line Method
SAE J1113-24 Electromagnetic Compatibility Measurement Procedure for Vehicle Components- Part 24:
Immunity to Radiated Electromagnetic Fields, 10kHz to 200MHz, TEM Cell Method
SAE J1113-41 Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and
Modules for the Protection of Receivers used on Board Vehicles
SAE J1113-42 (R) Electromagnetic Compatibility- Component Test Procedure- Part 42- Conducted Transient
Emission
SAE J1455 (R) Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty
Vehicle Applications
Military Standard MIL-STD-461E/F Requirement for the control of electromagnetic interference characteristics of subsystems and
equipment
Chrysler DC-10614 EMC Performance Requirements --- Components
DC-10615 Electrical System Performance Requirements for Electrical and Electronic Components
DC-11224 EMC Performance Requirements --- Components
DC-11225 EMC Supplemental Information and Alternative Component Requirements
GM GMW 3097 General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic
Compatibility
GMW 3172 General Specification for Electrical/Electronic Component Analytical/Development/Validation
(A/D/V) Procedures for Conformance to Vehicle Environmental, Reliability, and Performance
Requirements
Ford ES-XW7T-1A278-AB Electronic Component EMC Requirements Overview
ES-XW7T-1A278-AC Component and Subsystem Electromagnetic Compatibility
HARLEY-DAVIDSON MOTOR EG-812-22613 Electrical / Electronic Component Electrical Test Guidelines
EG-812-22614 Electrical / Electronic Component Electromagnetic Compatibility Test Guidelines
Taiwan BSMI CNS 14434 Vehicle, motorboats, and spark-ignited engine devices-Radio disturbance characteristics-Limits
and methods of measurement
CNS 14498-1 Road vehicles - Electrical disturbances from conduction and coupling - Part 1 :Definitions and
general consideration
CNS 14498-2 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient
conduction along supply lines only
CNS 14498-3 Road Vehicles - Electrical disturbance by conduction and coupling - Part3:Vehicles with nominal
12V or 24Vsupply voltage-Electrical transient transmission by capacitive and inductive coupling
via lines other than supply lines
CNS 14499 Road vehicles-Electrical disturbances from electrostatic discharges
CNS 14500 Limits and methods of measurement of radio disturbance characteristics for the protection of
receivers used on board vehicles
CNS 9589 General Rules of Environmental Testing Method for Automotive Electronic Equipment
HIATEC TES-95465 Rev.D The Electrical/EMC Environmental Test Specification
China GB GB 18655 Limits and methods of measurement of radio disturbance characteristics for the protection of
receivers used on board vehicles
Japan JASO JASO D001-94 General rules of environmental testing methods for automotive electronic equipment
MAZDA MES PW 67600A
Automotive parts standard-Electronic Component

Mitsubishi ES-X82010
General specification of enviroment tests on automotive electronic equipment
Nissan 28400 NDS XX Nissan Design Specification
28401 NDS02 EMC specifications of electrical and electronic parts.

Contacts
For more information, please contact us at: service@ccsrf.com

CCS Wugu Lab 
Address: No 11, Wugong 6th Rd, Wugu District, New Taipei City 24891 ,Taiwan(R.O.C)  
Tel:+886-2-22999720